Item Type: Concertina
Action Board Summary: The instrument's Action is made up of a brass sheet with a folded-down T-shaped top section that holds down the brass-sheet levers. The brass-strip section of the longer lower note levers is broader over much of their length. Pallets are now circular pale cardboard, with those to bass reeds of a larger diameter, and the large chopped-sided air-valve pallet 38mm wide.
Action Board Pivot: A brass sheet with a folded-down T-shaped top section
Action Board Levers: Brass-strip levers.
Action Board Springs: Brass
Action Board Pallets: The pallets are circular pale cardboard, with those to some lower reeds of a larger diameter.
Action Board Securing-screw pattern: A first appearance in the Collection of an array of seven tall cylindrical wooden fret-support columns glued around the action boards - but NOT screwed though the end-frets: (two of them amongst the higher keys), and with a further two wooden cylindrical supports receiving the two long wood-screws from the wooden hand-strap, bar; no visible screws or supports are now used in the fret area.
Action Board Sub-fret-board Supports: No sub-fret boards: the array of supports touch directly upon the frets
Please email comments or reports of errors to
Created August 2009 by Neil Wayne
Last Modified 07 February 2012 by Neil Wayne, Chris Flint, Wes Williams
This page created Tuesday 14 February 2012.